*1 For a list of compatible lenses and other details, please refer to the SIGMA USB Dock UD-11 product page.
*2 SIGMA USB DOCK UD-11 (released in August 2020) is required to update the firmware

• Before you start the download of the installer program, make sure all applications in your computer are finished.
• Click the download button, or push the right button of your mouse (“right click”) and start download.
• Make sure SOP_1.7.0_setup.exe is saved in the destination you specified.

• If you have “SIGMA Optimization Pro” installed on your computer, uninstall it by using “Add or Remove Programs” on a computer. It is not possible to install “SIGMA Optimization Pro” properly if “SIGMA Optimization Pro” is already installed.
• First, you have to choose the language of the program you install. Select the language and push the OK button. Then, carry out the install according to the procedures displayed in the screen.

• Core2Duo or faster processor
• Windows 8.1, Windows 10
• 1GB of RAM
• 1GB of available hard disk space
• 24bit or more graphics card
• 1024 x 768 or higher screen resolution
• PC with USB 1.1 port

*1 For a list of compatible lenses and other details, please refer to the SIGMA USB Dock UD-11 product page.
*2 SIGMA USB Dock UD-11 (released in August 2020) is required to update the firmware

• Before starting the download of the installer program, make sure all applications in your computer are closed.
• Click the download button, or push the mouse button whilst holding down the Control key on your keyboard (Control+ Click).
• Select “download linked file” from the displayed menu. Start the download of the file.
• After completing the download of “SIGMA_Optimization_Pro160.dmg” file, it will be mounted automatically and “SIGMA Optimization Pro” disk image will be displayed. If the file is not mounted automatically, please double click the “SIGMA_Optimization_Pro160.dmg” file. “SIGMA Optimization Pro” disk image will then be displayed.

• To start the installation drag and copy SIGMA Optimization Pro folder from “SIGMA Optimization Pro” Disk Image to applications folder. Installation will be complete after being copied to this folder.
• Select and open the Applications folder from “Go” in the Finder menu.
• If SIGMA Optimization Pro already has been installed on your computer, please delete the “SIGMA Optimization Pro” folder in the “Application” folder before installing.

• MacOS10.13, 10.14, 10.15 and Intel Core Processor
• 1GB of RAM
• 1GB of available hard disk space
• 24bit or more graphics card
• 1024 x 768 or higher screen resolution
• PC with USB 1.1 port

*1 Movie editing is not possible with the SIGMA Photo Pro.
*2 Only compatible with the still image RAW data (DNG files) taken with the SIGMA fp.

• Before you start the download of the installer program, make sure all applications in your computer are finished.
• Click the download button, or push the right button of your mouse (“right click”) and start download.
• Make sure SPP_6.8.3_setup.exe is saved in the destination you specified.
• From SIGMA Photo Pro Ver. 6.6.0, it is possible to operate only with Windows OS 64 bit version and if Windows 10 or Windows 11 is preinstalled. If your computer is Windows OS 32 bit version, please use SIGMA Photo Pro 6.5.4, which is available to download from here
  .
• SIGMA Photo Pro 6.8.3 is required to develop RAW data (DNG files) shot with a SIGMA fp with firmware version 3.0 or later.

• Double-click the disk image of “SIGMA Photo Pro 6.8.3” and display the install dialog.
• Drag the icon of “SIGMA Photo Pro 6” and drop it on the application folder. Then, the install process will finish.

• Equivalent to Intel® Core2 Duo Processor or more (Intel® Core™ i series or higher is recommended)
• Windows 8.1 or Windows 10 is preinstalled (64bit OS)
• 4GB or higher RAM (8GB or more is recommended)
• 5GB of available hard disk space (10GB or more is recommended)
• 24-bit (16,770,000 color) graphic card or higher
• 1280×960px monitor resolution or higher

*1 Movie editing is not possible with the SIGMA Photo Pro.
*2 Only compatible with the still image RAW data (DNG files) taken with the SIGMA fp.

• Before starting the download of the installer program, make sure all applications in your computer are closed.
• Click the download button, or push the mouse button whilst holding down the Control key on your keyboard (Control+ Click).
• Select “download linked file” from the displayed menu. Start the download of the file.
• After completing the download of “PhotoPro6.8.3.dmg” file, it will be mounted automatically and “PhotoPro.6.8.3” disk image will be displayed. If the file is not mounted automatically, please double click the “PhotoPro6.8.3.dmg” file. “PhotoPro6.8.3” disk image will then be displayed.
• After installing the software, it will take a couple of minutes to boot for the first time. Please refrain from using other applications until it completes the start-up process.
• SIGMA Photo Pro 6.8.3 is required to develop RAW data (DNG files) shot with a SIGMA fp with firmware version 3.0 or later.

• Double-click the disk image of “SIGMA Photo Pro 6.8.3” and display the install dialog.
• Drag the icon of “SIGMA Photo Pro 6” and drop it on the application folder. Then, the install process will finish. 

• Equivalent to Intel® Core2 Duo Processor or more (Intel® Core™ i series or higher is recommended)
• MacOS10.13, 10.14, 10.15
• 4GB or higher RAM (8GB or more is recommended)
• 5GB of available hard disk space (10GB or more is recommended)
• 24-bit (16,770,000 color) graphic card or higher
• 1280×960px monitor resolution or higher

• Before you start the download of the installer program, make sure all applications in your computer are finished.
• Click the download button, or push the right button of your mouse (“right click”) and start download.
• Make sure SCP_1.3.0_setup.exe is saved in the destination you specified.
• It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

• If you have “SIGMA Capture Pro 1.2.0” installed on your computer, uninstall it by using “Add or Remove Programs” on a computer. It is not possible to install “SIGMA Capture Pro 1.3.0” properly if “SIGMA Capture Pro 1.2.0” is already installed.
• First, you have to choose the language of the program you install. Select the language and push the OK button. Then, carry out the install according to the procedures displayed in the screen.
• You need to restart the computer soon after this software is installed.

• Pentium 4 or faster processor (Core2Duo or higher recommended)
• Windows 7 or Windows 8 or Windows 10
• 2GB of RAM (3GB of more recommended)
• 1GB of available hard disk space
• 24bit or more graphic card
• 1024 x 768 screen resolution
• PC with USB2.0 port (USB1.1 or lower is not recommended)

• Before you start the download of the installer program, make sure all applications in your computer are finished.
• Click the download button, or push the right button of your mouse (“right click”) and start download.
• Make sure SCP_1.3.0_setup.exe is saved in the destination you specified.
• It is necessary that the firmware in the SD1 Merrill is 1.05 or later, and 1.10 or later in the SD1.

• To start the instalation drag and copy SIGMA Capture Pro folder from “SIGMA Capture Pro” Disk Image to applications folder. Installation will be complete after being copied to this folder.
• Select and open the Applications folder from “Go” in the Finder menu.
• If SIGMA Capture Pro 1.2.0 already has been installed on your computer, please delete the “SIGMA Capture Pro” folder in the “Application” folder before installing.

• Mac OS X Ver. 10.8 or later and Intel Core Processor (Core2Duo or higher recommended, Power PC is not supported)
• The software is not compatible with Mac OS X 10.12.0. Please use Mac OS X 10.12.1 or later.
• 2GB of RAM (3GB of more recommended)
• 1GB of available hard disk space
• 24bit or more graphic card
• 1024 x 768 screen resolution
• PC with USB2.0 port (USB1.1 or lower is not recommended)